1 thought on “Shanghai used car recycling contact number”
Stephanie
Contact: Manager Zhou, Tel:.
Ilvagant car recycling analysis: Calculating calculation method of scrapped displacement of vehicles: Registered vehicle displacement registration according to the displacement value registered on the motor vehicle registration certificate, according to one digit method method Calculation; displacement of unregistered vehicles, according to the displacement value stated by the imported motor vehicle factory or imported qualification certificate, calculate the four houses and five enrollment methods.
The displacement algorithm accurate to one bit after decimal point, and calculate it based on “Four House and Five Entry”. That is, 1.800 to 1.849 liters, which is 1.8 liters; 1.850 to 1.899 liters, which is 1.9 liters.
The old policy stipulates that the old car should be replaced, and the displacement of the new car cannot exceed the displacement of the scrap car. This article has been criticized in the execution. Some owners who buy low -displacement cars have difficulty upgrading the old car, which is equivalent to “only Q Q can be used to buy QQ.” Therefore, in order to facilitate citizens to choose models according to demand and economic capabilities, and upgraded in time, the new policy stipulates that the displacement restrictions on vehicle updates should be relaxed. If the displacement of the old car is below 2.5 liters, the displacement of the new car can exceed the scrap car, but the displacement does not exceed 2.5 liters; the displacement of the old car exceeds 2.5 liters, and the displacement of the new car must not exceed the original car.
The service life of the car is also very long. Although it is still a new car, there will be an old day after all. With the increase of mileage, the problem of classic cars gradually exposed. With the aging of the car, various rubber parts are the first, hard, damaged, and cracking. In addition to tires in cars, most rubber parts play a role in shock absorption, noise reduction, and sealing.
If the aging of the engine bracket rubber pad, the direct consequence is that the engine vibration is large; the aging of the valve oil sealed by the sealing isolation will cause the engine to burn the oil; however Dord the chassis of the car.
Contact: Manager Zhou, Tel:.
Ilvagant car recycling analysis:
Calculating calculation method of scrapped displacement of vehicles: Registered vehicle displacement registration according to the displacement value registered on the motor vehicle registration certificate, according to one digit method method Calculation; displacement of unregistered vehicles, according to the displacement value stated by the imported motor vehicle factory or imported qualification certificate, calculate the four houses and five enrollment methods.
The displacement algorithm accurate to one bit after decimal point, and calculate it based on “Four House and Five Entry”. That is, 1.800 to 1.849 liters, which is 1.8 liters; 1.850 to 1.899 liters, which is 1.9 liters.
The old policy stipulates that the old car should be replaced, and the displacement of the new car cannot exceed the displacement of the scrap car. This article has been criticized in the execution. Some owners who buy low -displacement cars have difficulty upgrading the old car, which is equivalent to “only Q Q can be used to buy QQ.” Therefore, in order to facilitate citizens to choose models according to demand and economic capabilities,
and upgraded in time, the new policy stipulates that the displacement restrictions on vehicle updates should be relaxed. If the displacement of the old car is below 2.5 liters, the displacement of the new car can exceed the scrap car, but the displacement does not exceed 2.5 liters; the displacement of the old car exceeds 2.5 liters, and the displacement of the new car must not exceed the original car.
The service life of the car is also very long. Although it is still a new car, there will be an old day after all. With the increase of mileage, the problem of classic cars gradually exposed. With the aging of the car, various rubber parts are the first, hard, damaged, and cracking. In addition to tires in cars, most rubber parts play a role in shock absorption, noise reduction, and sealing.
If the aging of the engine bracket rubber pad, the direct consequence is that the engine vibration is large; the aging of the valve oil sealed by the sealing isolation will cause the engine to burn the oil; however Dord the chassis of the car.